Environment & Carbon Finance

1.  Define OISD.

Answer:

2. List duties of Authorized Entrants.

3. Explain Standby Personnel briefly.

4. Discuss about Rescue & Emergency Services briefly

5. Define compressors.

6. Discuss various fire & safety issues in regards to gas and air compressors.

7. Describe the reciprocating compressor – gas recovery.

8. What are the different health issues related to marine, tank car, and tank truck loading and unloading

Case Detail:
There is no case study you need to answer the questions

1. Explain the concept of MSDS briefly.

2. Discuss about HAZCOMM.

3. Discuss 10 various hazardous classes of decontamination.

Assignment C 

Question No: 1
A geometric form (e.g. circle, triangle or rectangle) containing a safety symbol, wording or both, is known as the:

Hazards
Safety Standard
Colour Coding
Safety Sign

Question No: 2
Initial ………. must provide the employees with the understanding and skills needed to perform the entry safely.

Assistance
Documentation
Training
Help

Question No: 3
Workers performing decontamination procedures must also be protected from possible exposure to hazardous:

Material
Gases
Solids
Substances

Question No: 4
Protective clothing, equipment, and other tools may be surveyed with sensitive monitoring devices such as:

Swipe Tests
Laboratory Analysis
Ionization
Photo-ionization

Question No: 5
The hazardous substances are classified into various classes and inflammable liquids comes under:

Class 1
Class 2
Class 3
Class 4

Question No: 6
A Material Safety Data Sheet [MSDS] is a manufacturer-prepared written document concerning a:

Material
Chemical
Inventory
Hazard

Question No: 7
When new or updated MSDSs are received, a copy will be forwarded to the
HAZCOM manager for review of:

Hazards
Severity
Completeness
Effectiveness

Question No: 8
The area designated for decontamination is usually referred to as the contamination reduction:

Unit
Systems
Corridor
Containers

Question No: 9
The contamination reduction corridor should be clearly marked so that entry and exit points can be carefully:

Controlled
Monitored
Managed
Cared

Question No: 10
When a worker temporarily exits the exclusion zone, decontamination (or decon) does not need to be as thorough as for workers leaving the site at the end of a:

Job
Assignment
Work Shift
Duty

Question No: 11
The purpose of the safety signs is to attract attention rapidly to a danger and to facilitate its:

Identification
Result
Severity
Accidents

Question No: 12
The ………… program must also designate the persons who are to have active roles in entry operations.

Written
Spoken
Signed
Directed

Question No: 13
What procedures are designed to protect workers in confined spaces from outside hazards?

Turnkey
Group
Isolation
Team
Question No: 14
Which of these is a type of atmospheric hazard?

Flammable gases or vapors
Poisonous sprinklers
Excess of CO2
Excess of Oxygen

Question No: 15
There are a number of ways in which atmospheric hazards can occur in a ………… space.

Open
Large
Spacious
Confined

Question No: 16
HAZCOM requirements provide a regulatory mechanism to inform employees of hazards associated with chemicals found in the:

Containers
Vessels
Material
Workplace

Question No: 17
Safety signs and signals are used in the workplace to warn and instruct staff and others of risks to their safety and:

Accidents
Hazards
Fire
Health

Question No: 18
Provision of which act makes it mandatory to post safety signs on hazardous chemicals and materials to correctly identify their nature of hazard and exercise necessary safety precautions in handling of such materials?

Manufacturing Act 1948
Hazardous Material Manufacturing Act 1989
Workman Safety Act 1948
Indian Factory Act 1948

Question No: 19
Contrast colors - neutral color, or white or black, are used as a contrast in combination with the safety color or with the auxiliary color to enhance the effect and sensitivity of the:

Messages
Eyes
Hazards
Information

Question No: 20
In order to complete safety signs, certain symbols may be used within the:

Mathematical Forms
Analytical Forms
Geometrical Forms
Pictorial Forms

Question No: 21
The standard is intended to protect workers from ………….. of entry into permit required, confined spaces.

Accidents
Hazards
Dangers
Safety

Question No: 22
Lubricating oils and waxes are refined from the residual fractions of atmospheric and –

Distillation
Heat Distillation
Vacuum Distillation
Metal Distillation

Question No: 23
Control of treater temperature is important as phenol can cause corrosion above –

100° F
200° F
300° F
400° F

Question No: 24
Batch and in-line blending operations require strict controls to maintain desired product –

Safety
Quality
Storage
Distillation

Question No: 25
Additives in drums and bags need to be handled properly to avoid –

Strain
Spoils
Spills
Spoilage

Question No: 26
Heat exchangers use either steam or hot hydrocarbon transferred from some other section of the process for heat –

Controller
Extinguishers
Output
Input

Question No: 27
A means of providing adequate draft or steam purging is required to reduce the chance of explosions when lighting fires in –

Heat Cooler
Heat Extinguishers
Heat Exchangers
Heater Furnaces

Question No: 28
A coded sound signal which is released and transmitted by a device designed for that purpose, without the use of a human or artificial voice, is known as the:

Safety Signs
Verbal Communication
Hand Signal
Acoustic Signal

Question No: 29
Steering Committee of OISD, comprising of Principal Panelists from the …… industry, meets twice a year under the chairmanship of Executive Director, OISD to review various activities of OISD.

Oil
Petroleum
Steel
Coal

Question No: 30
The physical mixture of a number of different liquid hydrocarbons to produce a finished product with certain desired characteristics, is known as –

Distillation
Blending
Gasoline
Heat Exchanger

Question No: 31
Lubricating oils and waxes are refined from the residual fractions of atmospheric and –

Distillation
Heat Distillation
Vacuum Distillation
Metal Distillation

Question No: 32
Additives are added during and/or after blending to provide specific properties not inherent in –

Gasoline
Carbons
Chlorofluorocarbons
Hydrocarbons

Question No: 33
Ignition sources in the area need to be controlled in the event of a –

Loss
Accident
Damages
Leak

Question No: 34
The process of decontamination consists of physically removing or neutralizing hazardous contaminants from:

Personnel
Materials
Workplace
Materials

Question No: 35
One of the most important parts of the standard operating safety procedures at any incident or hazardous waste site is the methods to minimize:

Loss
Contamination
Deformities
Accident

Question No: 36
Borders on safety signs improve sign effectiveness by highlighting contrast between the sign and its:

Appearance
Messages
Information
Surroundings

Question No: 37
Health Signs means signs referring to a specific object, activity or situation and providing information or instructions about safety and/or health at work by means of a:

Information
Geometrical Forms
Hording
Signboard

Question No: 38
One of the most effective ways to minimize confined space accidents is the ………./ tagout procedure.

Walkout
Turnout
Burnout
Lockout

Question No: 39
Before entry is authorized, the employer shall document the completion of measures required to prepare a space for entry by completing an entry ………...

Formality
Permit
Certificate
Map

Question No: 40
Periodic Safety Audits of all the …………. handling facilities are undertaken by OISD to see if any improvement in the facilities, training to the operating personnel, operating systems / procedures etc. is required.

Steel
Coal
Oil
Petroleum